Mould-release agents and HPDC

The phase of use and spraying of a mould-release agent is one of the critical phases in high pressure die casting (HPDC). Spraying a mould-release agent on the permanent moulds in high-pressure die casting thus has an impact on:

• The cycle time
• The lifetime of moulds
• The quality of the parts (appearance, porosity...)

This represents the most complete range of die-coating products on the market and offers:

• Water-based mould-release agents, miscible with water in any proportion and compatible with a wide range of water hardnesses
• Water-free die-coating products
• Mould-release agents with or without silicone: Condafond 7xx range
• Die-coating products with or without wax
• Highly concentrated mould-release agents
• Recyclable mould release agent products: Condafond xxx REC range

Contact us: our foundry experts will offer the most suitable products for your installations!

For standard and high-silicon aluminium alloys, magnesium alloys.

Our research teams, attentive to your needs, have developed products with the following main advantages:

• Application over a wide range of temperatures: 100°C to more than 300°C
• Increase in your productivity
• Increase in lifetime of moulds, ejectors and other tools thanks to the use of materials with a high release power
• Reduction in clogging of spray systems and moulds, to give clean moulds and parts
• Optimisation of cycle times and reduction in production shutdown
• Reduction in the quantities of die-coatings used
• Reduction in faulty parts and rejects: reduction in porosity
• Reduction in emissions and smoke through the use of the most thermally stable products
• Observance of the regulations in force (Biocides Directive...)
• Reduction in the COD, BOD for water reprocessing (Chemical Oxygen Demand, Biochemical Oxygen Demand).

CONDAT offers equipment suitable for facilitating implementation of our lubricants:

In parallel, CONDAT offers associated high-performance lubricants for the machining of parts obtained from the foundry or by extrusion:

• Machining fluids