Condat tips : Coolant Maintenance for summer break

𝗘𝗻𝘀𝘂𝗿𝗲 𝗣𝗲𝗮𝗸 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 𝗣𝗼𝘀𝘁-𝗦𝘂𝗺𝗺𝗲𝗿 𝘄𝗶𝘁𝗵 𝗖𝗢𝗡𝗗𝗔𝗧

As summer draws to a close, it’s crucial to implement some best practices before a long period of inactivity. During the summer break, metalworking fluids face harsh conditions (heat, absence of circulation, no top-up…), making post-break maintenance essential. Here are CONDAT advice for a worry-free restart after enjoying a long break:

𝗕𝗲𝗳𝗼𝗿𝗲 𝗛𝗼𝗹𝗶𝗱𝗮𝘆𝘀:

• Ensure coolant concentration is at the upper limit
• Maintain pH recommended levels
• Minimize chlorides to prevent corrosion
• Remove contaminants like tramp oils and chips

𝗔𝗳𝘁𝗲𝗿 𝗦𝘂𝗺𝗺𝗲𝗿 𝗕𝗿𝗲𝗮𝗸:

• Check Bath Condition: Control the appearance, check pH and concentration are within specifications.
• If Concentration is low: Increase to recommended levels.
• If pH is low: Use a bactericide and a pH Booster as the emulsion is vulnerable to bacterial growth.
• If Both are Low: Use a bactericide and increase concentration.
  𝘍𝘰𝘳 𝘵𝘩𝘦 𝘳𝘪𝘨𝘩𝘵 𝘥𝘰𝘴𝘢𝘨𝘦, 𝘰𝘶𝘳 𝘦𝘹𝘱𝘦𝘳𝘵𝘴 𝘤𝘢𝘯 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘺𝘰𝘶.

𝗥𝗲𝗳𝗶𝗹𝗹 & 𝗠𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗕𝗲𝘀𝘁 𝗣𝗿𝗮𝗰𝘁𝗶𝗰𝗲𝘀:

If you start up with a brand-new emulsion, the best way to prolong the sump life is to do a proper maintenance prior to the filling of the machine!

• Use a system cleaner to clean the tank.
• Treat with a bactericide to sanitize the machine.
• Circulate the emulsion for 48 hours at low concentration, drain, and refill with a fresh emulsion.

CONDAT can provide you with tank-side additives to help you maintain your coolant in good conditions: System cleaner without bactericides, effective biocide and fungicide, pH Boosters, Antifoam agents…

Maximize your machine’s lifespan and efficiency with CONDAT’s comprehensive maintenance solutions.

For more information, contact our sales team.